Scientific Writing


HOW TO WRITE ACADEMIC PAPER
Academic Paper Standards

  • check for rules from website
  • Total max 5000 words
  • 1 figure = 300 words 
Flow of Writing

  • abstract (max. 200 words)
    • background (1 sentence) 
    • problem statement (1 sentence) define novelty
    • aim statement (1 sentence) 
    • flow of info summary (3 sentence)
    • key findings (1 sentence)

  • introduction
    • background (1 paragraph) (HOW MANY SENTENCE)
    • problem statement (3 paragraphs) define novelty
      • what is the problem that you want to solve
        • the problem + lit. review + novelty or criticize (proactive approach + feedback)
        • the problem + lit. review + novelty or criticize (early architectural design approach)
        • the problem + lit. review + novelty or criticize (objective rational investigation)
    • aim statement (1 long sentence) (to this end ...... + to the best of  author's knowledge the novelty of current work......... + climate, investigate uncertainity, input influence on energy demand) 

  • Methodology 
  • Results
  • Discussion
  • Conclusion
Must Do !!
  • Using same jargon for specific terms for all places. For instance, if you say ‘input parameters’ continue with it do not mix with ‘decision variables’ term.


Comments

Post a Comment

Popular posts from this blog

An Algorithm for Efficient Urban Building Energy Modeling and Simulation

Image
Abstract: The urban population increases continuously since the industrial revolution, and the residential buildings have the primary responsibility for the total energy demand. There is a need for the analysis of the residential building stock for energy efficiency and sustainable planning. However, energy modeling and simulation in urban scale is expensive in computational complexity and time, due to various building geometries and occupancy types. This research proposes a method to increase the efficiency of the simulation process by reorganizing the building geometries with functional clustering and radiation analysis scaling. In order to accelerate the urban building energy modeling (UBEM) process, the building geometries are modified based on energy simulation standards, then, clustering is determined based on radiation analysis and outside boundary conditions. The candidates are selected according to the selection percentage that has been identified before the process to simul
Read more

07.09.2017 - How to create or modify EnergyPlus Weather Data (EPW)

Image
How to modify a weather (EPW) file or create new ? Elements  is a free, open-source, cross-platform software tool for creating and editing custom weather files for building energy modeling. The goal of the project is to develop a comprehensive, integrated application suitable for handling all of the common tasks associated with weather files. link:  http://bigladdersoftware.com/projects/elements/ How to modify a weather (EPW) file with other data? run the weather converter on the original file (Energyplus component) convert the file to "EnergyPlus CSV" (it exist in excel) open the EnergyPlus CSV file in your favorite spreadsheet program. (excel) make the mods, saving it as CSV from the spreadsheet program. run the weather converter again, this time selecting the CSV and make sure the File type is "EnergyPlus CSV" convert it to EPW. link :  http://bigladdersoftware.com/epx/docs/8-3/auxiliary-programs/energyplus-weather-file-epw-data-diction
Read more